Description

• Abans 4.5kW Instant Water Heater – Reliable Hot Water, InstantlyKey Features:
  • Powerful 4.5kW Heating Element – Enjoy rapid heating for a consistent and comfortable water temperature every time.
  • Instant Heating Technology – No storage tank needed; hot water is delivered on demand, saving energy and space.
  • Compact & Sleek Design – Ideal for modern bathrooms or kitchens with limited space.
  • Safety First – Equipped with advanced safety features including an automatic thermal cut-off, overheat protection, and a pressure relief valve.
  • Easy to Install & Use – Simple interface with clear indicators for effortless operation and maintenance.
• Upgrade your home with the Abans 4.5kW Instant Water Heater, designed for efficiency, safety, and convenience. Whether it’s a chilly morning or a relaxing evening shower, this compact and powerful heater delivers instant hot water without the wait.
• Specification

• Model	ABH608PNW
  Construction	Open Outlet
  Power Input	4.5kW
  Main Voltage	220V
  Frequency	50/60 Hz, a.c.
  Protection Class	1
  Enclosure	IP25 Splash Proof
  Mode Of Operation	Continuous Operation
  Main Connection	Permanent Connection
  Dimensions	423mm(H) x 200mm(W) x 95mm(D)
  Pipe Connection	1/2” Threaded BSP
  Weight	2.4kg
  Minimum Water Flow Rate	2 l/m
  Minimum Inlet Water Pressure	0.2 Bar (0.02MPa)
  Maximum Inlet Water Pressure	3.0 Bar (0.3MPa)

  Always follow the instructions given by Abans service team, when buying / installing instant water heaters.·         The MCB should be matched according to the current and voltage rating of the unit.·         And, this is applicable, any water heater either with pump or without pump, if maximum current consumption is more than 13A

• ·         Always follow the instructions for installation and electrical connections according to the product manual individually for your own safety.
• ·         To be installed the unit with a power connection through a 2-pole circuit breaker (MCB) instead of Plug top and base. The whole power circuit for the unit must allow the maximum power consumption of the water heater. Because a longer run with a current consumption more than 13A through a plug top and base (13A) will make the plug top burn.
• Instructions to Use.